A few weeks back, I made an Envelope Card and posted it to my blog. I had several inquires about how it was made, including one from The Outlawz Monday Greetings Challenge. They wanted to know if I could do a tutorial of it and I agreed. Because I had no photos of the process for the first one I did, I made another one and photographed it as I went along.
So, today I'm a Guest Designer for the Greetings challenge where "Christmas" is our theme and "Fred, She Said" is our sponsor. They generously supplied the "Nuthatch" image for me to use. I'm showing the step by step process here on my blog. I tried to keep it as short as possible but if I ended up not being clear about something, please leave me a comment and I'll do my best to clarify it.
Starting at Step 1: I printed and colored the image with ProMarkers, then cut it to a 4 inch square.
Wrap it around the folded envelope, overlap it and adhere the overlap to hold it. That sleeve will slip off to allow for opening the card.
So, today I'm a Guest Designer for the Greetings challenge where "Christmas" is our theme and "Fred, She Said" is our sponsor. They generously supplied the "Nuthatch" image for me to use. I'm showing the step by step process here on my blog. I tried to keep it as short as possible but if I ended up not being clear about something, please leave me a comment and I'll do my best to clarify it.
Starting at Step 1: I printed and colored the image with ProMarkers, then cut it to a 4 inch square.
Step 2: I used scissors to distress the edges of the image.
Step 3: Cut the envelope paper into a square measuring 6 7/8 inches, (I used solid teal green instead of patterned but either will work as long as the back side is plain) then cut a notch at the mid-point on each side. Don't worry that the notch is a perfect right angle cut. That will be done later.
Step 4: Measure 2 1/2 inches in from the point (or whatever distance you need to match the notches), draw a light pencil line between two notches, then score and fold along that line. Do this between each notch to make a square.
Step 5: Make the notches exact right angle cuts by trimming with scissors straight with the scored lines. It's easier to do this now than to try to make it a perfect right angle when you first make the notches. Trust me on this one! :-D
Step 6: Cut a CS square, just slightly smaller than the inside square of your envelope. Mine is 4 1/4 inches square. If you are using paper with a printed design for the envelope, make sure you adhere the smaller square to the side with the print. You'll need the plain, white side for your address if you are mailing the finished card.
Step 7: Adhere the image to the inside square. I also added my sentiment at this point.
Step 8: Fold the points along the score lines to close the envelope. DO NOT glue or tape them closed. Instead, make a sleeve by cutting a strip of paper or CS 10 1/2 inches long and about an inch wide.
Wrap it around the folded envelope, overlap it and adhere the overlap to hold it. That sleeve will slip off to allow for opening the card.
Challenges:
Remember, if I've been unclear on any of the steps, leave me a comment and I'll try to fix that. :-D Happy Crafting. NanaConnie
